Tuesday, November 29, 2022

Woodturning an almond and olive wood nut cracker

 




















Tools and materials:

Lathe

Chuck kit

Tormek T8 Sharpening System

Tormek Woodturner’s Kit

Cordless drill

Forstner bit set

Wire Burning Kit


In this video I make nut cracker that uses an almond hammer and an olive wood bowl to crack the nuts.


The olive wood was a bit cracked, so I filled the cracks with sawdust and glue. 


I then turned the tenon for my chuck. 


Next I hollowed it. This was trickier than I thought because I didn’t have much space for the tools to get in. 


To clean the bottom I used a conical piece to help me centre it better. 


Next I made the hammer. I pre-frilled the hole with a forstner bit. 


Next I turned the handle and glued it in place. 


I finished everything with mineral oil.


And it worked really nice. But that was it. See you soon with a new project video. 



Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Friday, November 25, 2022

Πώς δουλεύουμε το ξύλο με τη ράσπα και τη λίμα

 



Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. 

Tools and materials I propose:

Flat rasp

Round rasp

Flat file

Round file


Σε αυτό το video δείχνω πώς μπορούμε να επεξεργασθούμε το ξύλο μέ ράσπα και λίμα.


Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Tuesday, November 22, 2022

DIY τρόποι κοπής ξύλου

 


Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. 

Tools and materials I propose:

Miter box

Hand saw

Jigsaw

Speed square

Circular saw

Circular saw guide rail


Σε αυτό το video δείχνω μερικούς βασικούς τρόπους και μερικά εργαλεία σχετικά με την κοπή ξύλου.


Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Friday, November 18, 2022

Τρύπες και τρυπάνια στο ξύλο

 



Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. 

Tools and materials I propose:

Cordless drill

Hole saw

Forstner bit set

Step drill bit set

Spade bits


Σε αυτό το video προσπαθώ να δείξω τα βασικά σχετικά με το πώς κάνουμε τρύπες στο ξύλο.



Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Wednesday, November 16, 2022

Making a DIY tool box

 



















Tools and materials:

Cordless Impact Driver

Cordless drill

Random orbit sander

Block plane

Table saw

Bandsaw

Belt sander

Hole saw

Drill press

Air compressor, nail and staple gun kit

Block plane

Lathe

Wood turning tools set

Wire Burning Kit


In this video I make a simple tool box out of plywood.


I begun by cutting my plywood to basic size on the table saw. 


I then cut the sides on the bandsaw and sanded them on the belt sander.


I used  a hole saw to add a dowel as a handle. Because the dowel was slightly larger I used a sanding bit to enlarge the holes. 


I then glued and nailed the parts in place. I also added screws. 


Next I made the cap. On the slides I added some wax to make it slide easier. 


I added legs and also a divider in the inside.


Finally I turned a locking pin. This locks the cap in place.


I made this box basically for my turning tools but you can adapt it in any situation.


But that was it. See you soon with a new project video. 



Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Thursday, November 10, 2022

Πώς δουλεύουμε το ίσιο σκαρπέλο του μαραγκού

 



Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. 

Tools and materials I propose:

Chisel set

Sharpening kit


Σε αυτό το video δείχνω πώς χρησιμοποιούμε το απλό σκαρπέλο στις ξυλουργικές μας εργασίες.


Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Tuesday, November 8, 2022

Πώς κόβουμε κύκλους από ξύλο με το ρούτερ

 



Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. 

Tools and materials I propose:

Trim router

Router bits

Cordless drill

Cordless Impact Driver


Σε αυτό το video δείχνω μια απλή τεχνική με την οπόια χρησιμοποιούμε το ρούτερ σαν διαβήτη με κοπτικό. 


Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase

Friday, November 4, 2022

Πώς να συνδέσω ξύλα με καβίλιες

 



Παραθέτω ενδεικτικά μερικά από τα εργαλεία (ή παρόμοια) που χρησιμοποιησα. 

Tools and materials I propose:

Cordless drill

Dowel centering jig

Dowel center pin

6mm dowels

8mm dowels


Σε αυτό το video, δείχνω μια απλή και φθηνή λύση για συνδεσμολογία ξύλων στο DIY εργαστήριο και όχι μόνο.


Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.

Tuesday, November 1, 2022

How to make a DIY planter box

 




















Tools and materials:

Cordless Impact Driver

Cordless drill

Random orbit sander

Block plane

Table saw


In this video I make a rolling planter box. This type of planter is ideal for balcony gardens. 


I begun by cutting my stock to size with a circular saw. I used mostly reclaimed material for the hole project. 


I then sanded the pieces a little bit and then broke the edges with a block plane. 


Next I used the table saw to cut a few braces which I screwed in place. 


I then screwed the sides and the bottom pieces. For the bottom I used a scrap piece as spacer. 


After sanding I applied a few coats of walnut water based varnish.


Finally I screwed the wheels in place.


This planter box is ideal for balcony gardens, because you can easily clean by moving the hole box at once.


But that was it. See you soon with a new project video. 


Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.