On this project I used Inventables X-carve CNC machine:
Tools and materials I propose:
I made this clothes hanger out of 15mm plywood. The pins are made out of beech wood on the lathe.
I begun by creating my vector design. I then imported it into Easel, the online software my CNC uses.
I screwed a 15mm plywood piece on my CNC’s base and let the machine do the rest.
I used the bandsaw to release the piece from the tabs that holded to the stock.
Then I sanded the piece.
I used a roundover bit on my router to smooth the edges of my hanger.
I then cut a piece of beech wood on the table saw. I turned the pins on the lathe. This was classic spindle work. I mostly used the spindle gouge and parting tools. It helps to have a template which you can take your measurements from time to time. This make the process of copying parts on the wood lathe a bit more efficient.
I then drilled and counter sinked two holes. Through these you can hang the piece on the wall.
I made a mini jam chuck on the lathe, so I can paint the pins. I used latex paint and a small piece of sponge for that job. I used the heat gun to dry the paint fast. I then sanded a little bit and then I added another coat.
I glued the pins in place.
I finished the piece with three coats of clear, water based varnish. I sanded between coats with 400grit.
And my project was ready. I am really happy with the way it came out. I really want to thank Inventables for sponsoring this project. But that was it, see you soon with a new project video.
Disclosure: Some of the links below are affiliate links, meaning, that at no cost to you, I get a small commission if you click through and make a purchase.
No comments:
Post a Comment